“Site can’t be reached” is a frustrating error that can pop up on any device, including a Mac.
Though the error message is fairly general, there are a few possible causes, ranging from an incorrect DNS entry to a problem with your router. Fortunately, there are a few things you can try to fix the issue.
In this guide, we will talk about 5 ways to fix the error “Site can’t be reached” on Mac.
11 reasons why site can’t be reached error happens:
The government applies censorship rules to some websites in order to prevent people from accessing them.
Domain Name System is what translates human-readable website names (like lifewire.com) into IP addresses that computers can understand (like 22.214.171.124). Sometimes, the DNS entries for a particular site can become outdated or corrupted, which can lead to errors when you try to access the site.
If you have a firewall enabled on your computer, it may be blocking access to the website you’re trying to visit.
Sometimes, browser extensions can interfere with your ability to load a website properly. Try disabling all of your extensions and then re-loading the page to see if that fixes the problem.
Cookies and cache:
Your browser’s cookies and cache can sometimes cause problems with loading websites. Clearing your cookies and cache may fix the issue.
Temporary internet issues:
There are a number of different things that could cause temporary internet issues, from bad weather to problems with your ISP. If you’re having trouble accessing a website, it could be due to a temporary issue that will resolve itself eventually.
If you’re on a corporate network, there may be network rules in place that are preventing you from accessing certain websites. Talk to your IT department to see if this is the case.
Viruses or malware:
Sometimes, viruses or malware can interfere with your ability to access certain websites. If you think this might be the case, run a virus scan and/or try using a different browser.
If you’re trying to access a website that requires authentication (like a school website), make sure you’re entering the correct username and password. If you’re still having trouble, talk to your IT department.
Website down for maintenance:
If a website is down for maintenance, you won’t be able to access it. Try again later.
9 Ways to Fix the Error ‘Site Can’t Be Reached’ on Mac:
1. Check the URL
The first thing you should do when you see the “Site can’t be reached” error is to check the URL you’re trying to access. Make sure you’re using the correct spelling and domain name (e.g., .com, .net, .org, etc.). If the URL is correct and you’re still seeing the error, move on to the next method.
2. Restart your computer
If you’re still seeing the “Site can’t be reached” error after checking the URL, try restarting your computer. This will clear any DNS caching that may be causing the problem.
3. Clear your browser’s cookies and cache
Clearing your browser’s cookies and cache can sometimes fix the “Site can’t be reached” error. To do this in Google Chrome, click the three dots in the top-right corner of the browser and choose “More tools” > “Clear browsing data.” Make sure to select “Cookies and other site data” and “Cached images and files” before clicking “Clear data.”
4. Disable your firewall
If you have a firewall enabled on your computer, it could be blocking access to the website you’re trying to visit. To disable the firewall on a Mac, open System Preferences and click on “Security & Privacy.” Click the “Firewall” tab and make sure that the “Turn On Firewall” option is not selected.
5. Try using a different browser
If you’re still seeing the error after trying all of the above methods, try accessing the website in a different browser. Sometimes, certain browsers can have difficulty loading certain websites. If one browser isn’t working, try another and see if that fixes the problem.
6. Restart Internet Router:
If you’re still having trouble accessing a website, try restarting your router. This will clear any temporary network issues that might be causing the problem.
7. Check Host File:
The host file is a file that maps IP addresses to hostnames. Sometimes, the host file can become corrupted, which can lead to errors when trying to access certain websites. To check your host file, open the Terminal and type “sudo nano /private/etc/hosts”. If you see any entries for the website you’re trying to access, delete them and save the file. Then try accessing the website again.
8. Reinstall Browser:
If you’re still having trouble accessing a website, try reinstalling your browser. This will reset all of your browser settings, including cookies and cache.
9. Use a VPN:
If you’re in an area where there is censorship or blocked websites, you can use a VPN to bypass these restrictions. A VPN will route your traffic through a server in another location, which can help you access blocked websites.
How do you fix this site that can’t be reached on Mac?
This is a common problem that can arise when trying to access a website on a Mac. There are a few potential causes, but the most likely one is that your DNS settings are incorrect.
Try changing your DNS settings to those of Google’s public DNS servers (126.96.36.199 and 188.8.131.52). Alternatively, you may need to flush your DNS cache if you’re still having trouble accessing the site in question. You can do this by running the command “dscacheutil -flushcache” in Terminal.
If these steps don’t resolve the issue, then it’s possible that the website itself is down or experiencing difficulties and you’ll just have to wait until it’s back up and running.
How can I fix this site can’t be reached?
Did you recently update your DNS settings? If so, then it’s possible that your new settings aren’t propagating across the internet yet. Give it some time and try again later.
In the meantime, you can try using Google’s public DNS servers (IPv4 addresses: 184.108.40.206 and 220.127.116.11; IPv6 addresses: 2001:4860:4860::8888 and 2001:4860:4860::8844). To do this, open Network Connections (search for it in the Windows search bar) and go to Properties for your active network connection.
Under “Networking,” select “Internet Protocol Version 4 (TCP/IPv4)” or “Internet Protocol Version 6 (TCP/IPv6)” and click “Properties.” In the new window, select “Use the following DNS server addresses” and enter the IPv4 or IPv6 address for one of Google’s public DNS servers. Click “OK” to save your changes.
Why can’t I open links on my Mac?
There are a few potential reasons why you might not be able to open links on your Mac.
One possibility is that your web browser isn’t configured correctly.
Another possibility is that the link itself is broken or leads to a site that’s been blocked by your computer’s security settings. If you’re having trouble opening links, the first thing you should do is check your web browser’s settings.
This will give you access to more detailed information about what’s going on when you try to open a link. If you’re still having trouble, then you can try resetting your web browser or contacting Apple Support for help.
Why does Google keep saying this site can’t be reached?
Google may be saying this site can’t be reached for a number of reasons. The site may be down, or there may be a problem with your internet connection.
Alternatively, Google could simply be having difficulty accessing the site. Whatever the reason, it’s best to check with the site itself to see if there’s an explanation before trying to access it again.
Why does my Mac say Safari Cannot open page?
There are a few reasons why Safari might say that it cannot open a page.
Main reason might be that the site you’re trying to access is down.
Also, it might be that there’s a problem with your internet connection. If you’re on a public network, for example, there might be restrictions in place that are preventing you from accessing certain websites. If Safari can’t open a page, it will usually give you an error message that will tell you what the problem is. If you’re not sure how to fix the problem, then you can contact Apple Support for help.
Why some websites are not opening in Chrome?
There can be a few reasons why some websites are not opening in your Chrome browser.
One reason could be that there is a temporary issue with the website itself and the issue should resolve itself soon.
Another reason could be that your Chrome browser is out of date and you will need to update it in order to access the website.
You can usually do this by going to the “About Google Chrome” section under your settings.
If neither of these solutions works, then it’s possible that the website is blocked by your internet service provider or by a firewall.
Why some websites are not opening in Chrome on Mac?
It could be that the website is not optimized for Chrome on Mac. Many websites are designed for viewing in the Firefox or Internet Explorer browsers, and may not work correctly in Chrome.
In particular, some features and functionality may not work properly, or the website may appear distorted. If you experience this problem with a website, you can try using the Firefox or Internet Explorer browsers to see if the website works correctly.
If it does, then you can contact the website’s owner or developer and ask them to design a version of the website that is compatible with Chrome on Mac.
These are some of the most common ways to fix the “Site can’t be reached” error on Mac. If you’re still having trouble accessing a particular website, there could be other factors involved that are beyond your control. In such cases, you may need to wait for the issue to resolve itself or contact the website’s owner for further assistance.